1. | Complies with NEMA TS1 & TS2 environmental requirements for traffic control equipment |
2. | Complies with IEC61000-6-2 EMC standard for industrial environments |
3. | UL1604 class 1 division 2 classified for use in hazardous locations |
4. | DIP switch configuration for link fault pass through, link down alarm, speed, duplex mode |
5. | Alarms for power and port link failure by relay output |
6. | DIN-rail mounting kit included |
7. | Panel mounting kit sold separately |
8. | Power supply sold separately |
9. | 3 year warranty |
EL900-A-B-1-A Media converter 10/100 TX to 100FX MM SC, Terminal Block, -40°C to 75°C |
|
EL900-A-C-1-A Media converter 10/100 TX to 100FX MM ST, Terminal Block, -40°C to 75°C |
|
EL900-A-N-1-A Media converter 10/100 TX to 100FX SM SC 20 KM, Terminal Block, -40°C to 75°C |
|
EL900-A-O-1-A Media converter 10/100 TX to 100FX SM SC 40 KM, Terminal Block, -40°C to 75°C |
|
EL900-A-Q-1-A Media converter 10/100 TX to 100FX SM SC 20 KM Single-fibre (TX:1310nm RX: 1550nm), Terminal Block, -40°C to 75°C |
|
EL900-A-R-1-A Media converter 10/100 TX to 100FX SM SC 20 KM Single-fibre (TX:1550nm RX: 1310nm), Terminal Block, -40°C to 75°C |
|
EL900-A-S-1-A Media converter 10/100 TX to 100FX SM SC 40 KM Single-fibre (TX:1310nm RX: 1550nm), Terminal Block, -40°C to 75°C |
|
EL900-A-T-1-A Media converter 10/100 TX to 100FX SM SC 40 KM Single-fibre (TX:1550nm RX: 1310nm), Terminal Block, -40°C to 75°C |
Interface Supported | RJ45 ; SC ; ST |
Mounting Options | DIN-rail ; Rack-mount ; Panel-mount |
Primary Power | 12~48 VDC |
Temperature Rating | -40°C~75°C |
Regulatory Approvals | CE/FCC ; UL60950-1 ; UL1604 ; NEMA |
PoE | No |
Dual Power Inputs | Yes |
Fault Relay Output | 1 |
Digital Inputs | 0 |
Digital Outputs | 0 |